DMSTA Simulation Results				Case:	OKEE_7599		Period:	1/1/1973	to	12/31/1999
Case:	calib to 1975-1999; observed concs in pelagic zone; simulation affected by intial condition
Input Series		OKEECHOBEE			Tanks in Series		1.0	Surface Area (km2)		1732.0000
Simulation Period		11/04/62	thru	12/31/99	Mean Water Load  (cm/d)		0.7	Mean Depth (cm)		265
Output Period		01/01/73	thru	12/31/99	Max Water Load (cm/d)		2.6	Max Depth (cm)		363
Calib Period		01/01/75		12/31/99	Inflow Conc  (ppb)		181.6	Freq Depth <  5 cm		0.0%
Startup Interval (days)		4441	Iterations	-10	Inflow P Load (mg/m2-yr)		269	Load Reduction		73%
Avg Interval (days)		90	Wtr Bal Error	0.0%	Outflow FWM  Conc (ppb)		73.3	Conc Reduction		60%
Parameter Set:		none	Mass B Error	-0.1%	Outflow C with Bypass		73.3	Time Freq Conc > 10 ppb		40%
K (m/yr)		3.200	Kd (m/yr)	0	95th Percentile (ppb)		88.0	K - SS, C*=4 ppb (m/yr)		3.1
C1 (ppb)		150.0	Weir Depth (cm)	0	Outflow Geo. Mean (ppb)		70.7	Storage Turnover (1/yr)		8.5
C0  (ppb)		4.0	Cont Depth (cm)	0	Outflow GM,  Q>0 (ppb)		70.4	Mean Stored P (mg/m2)		462
C2 (ppb)		0	Qout Intercept	0.0	Seepage Loss		0%	Storage Inc/Net Removal		-1%
Zx  (cm)		40	Qout Exponent	0.0	HRT (days)		948.3	Outfl. Seepage (cm/d/cm)		0
Ki	E/m2-d	0	0	Model 2	Mean Biomass (g/m2)		#N/A	Biomass Turnover (1/yr)		#N/A
Kb	1/d	0	0	"	Gross PP  (g/m2-d)		#N/A	Total Resp (g/m2-d)		#N/A
Kr	1/d/g/m2	0	0	"
Ka	1/d	0	0	"
Kc	ppb	0	0	"
Ke	1/d	0	0	"
Ku	mg/m2	0	0	"
Calibration  Statistics for Period:			01/01/75	thru	12/31/99
						Mean	Mean
Inflow P Conc (ppb)  =		182	Count	Observed	Predicted	Residual	Resid%	RSE%	R2
Mean Depth (cm)			101	269.4	265.9	3.4	1%	2%	98%
Flow (cm/day)			101	0.27	0.27	0.00	0%	59%	72%
Flow-Wtd-Mean Conc (ppb)			101	100.1	72.1	28.0	39%
Geometric Mean Conc (ppb)			101	86.7	70.3	16.4	23%	45%	0%
Mean Conc (ppb)			101	91.4	71.0	20.9	29%	43%	0%
Outflow Load (mg/m2-d)			101	0.27	0.19	0.08	42%	90%	58%
Pred Q x Conc (mg/m2-d)			101	0.27	0.19	0.07	39%	73%	74%
Conc Reduction (%)			101	45%	60%	-0.15	-15%
Obs Load2 = Predicted Flow x Observed Conc
Green lines on x axis of concentration plots indicate model calibration period.  Statistics at top of sheet are for entire output period.
03/02/05